Installation of solar street lamp battery

1.When placing the battery in the control box, it must be handled with care to prevent damage to the control box;
2. The connecting wires between batteries must be pressed onto the battery terminals with bolts and copper gaskets used to enhance electrical conductivity;
3. After connecting the output line to the battery, it is prohibited to short circuit it under any circumstances to avoid damaging the battery;
4. When the output line of the battery is connected to the controller in the pole, it must pass through a PVC conduit;
After completing the above, check the wiring at the controller end to prevent short circuits. Close the door of the control box after normal operation.