Highlights of solar street lamp products

In terms of working principle, solar street lamps use solar energy as the light source, and during the daytime, the solar panel will charge the battery. At night, when lighting is needed, the battery will start supplying power to the light source. Its use does not require the laying of complex and expensive power supply lines, making it possible to install it in any environment on any site. Its batteries use natural light, can be recycled, and do not require external power. The source is green and environmentally friendly. When sunlight is insufficient to a certain extent, solar street lamps can automatically adjust their switches, truly achieving unattended, all-weather operation.
Solar street lamps differ greatly from traditional high-voltage incandescent street lamps in product characteristics, material structure, and power supply lines. Solar street lighting is a kind of traffic lighting that our country uses solar energy, a new type of energy, as an external power source for street lighting. In urban life, street lighting plays a very important role and is the eye of our travel and nightlife.
In terms of product characteristics, solar energy is used as the lamp source for solar street lamps. During the day, it can use a solar circuit board to charge the battery inside the street lamp. At night, the battery can supply power to the lamp, completely meeting the lighting needs. The solar power used for solar street lamps is green and environmentally friendly, and can be seen everywhere in nature. This saves materials required for laying power supply lines, saves a lot of manpower and material resources, and improves construction efficiency. In addition, solar street lamps are green and environmentally friendly, energy saving and consumption reduction, have a long service life, and a stable product structure, which have very good social and economic benefits.
Solar street lamps, environmental conditions for use: 1. Altitude: ≤ 5000M; 2. Ambient temperature: - 50 ℃_+ 70℃； 3. Design wind speed: 35m/s; 4. Relative humidity: 80%; 5. Seismic intensity: Level 8
2、 Applicable standards (latest prosecutorial standards):
The manufacturing, testing, and other aspects of all equipment and materials shall comply with the following standards: GB7000.1-2002 General Safety Requirements and Tests for Luminaires GB7003-86 Classification of Degrees of Protection Provided by Luminaires Enclosures QB/T Electroplating and Chemical Coatings for Luminaires GB7248-87 Safety Requirements for Electric Light Sources
GB9468-88 "Photometric Testing of Road Lighting Fixtures"
GB19652-2005 "Quality Grading and Other Indicators for Electric Light Sources" GB5702-85 "Methods for Evaluating the Color Rendering of Light Sources"
GB50259-96 "Code for Construction and Acceptance of Electrical Lighting Installations" CJJ89-2001 "Code for Construction and Acceptance of Urban Road Lighting Engineering" IEC60598-1 "International Safety Standards"